Rev Limiter / Speed Limiter (magnet switch) 2-stroke scooters / mopeds

Digital overspeed governor with magnetic double check

Digital overspeed governor with magnetic double-check and automatic reactivationDigital calculation and control of speed and rpm

Function:

At the heart of the DZB is a powerful microprocessor which constantly calculates and evaluates the current speed and rpm.

Speed determination:

The DZB determines the speed via the wheel sensor supplied together with a small self-adhesive magnet for the rim.

Speed determination:

The RPM is calculated directly via the pickup cable of the CDI ignition at each piston revolution.

Operating modes:

• KMH mode: storage of an upper speed limit.
• RPM mode: Setting a maximum speed.
• Combi mode: Works simultaneously with RPM and speed limit.

Programming and control:

Programming the maximum speed/maximum speed is extremely simple. Simply press the internal program button to save the current speed or rpm as the upper limit, depending on the operating mode.

Dimensions:

The housing is tiny. The dimensions are 45x45x18mm + mounting eyelet. The length of the connection cable is 45-50cm, the sensor cable for deactivation is approx. 100cm long. The dimensions of the wheel sensor are only approx. 28x19mm, the cable length is approx. 50cm.

Installation:

You must connect the 4 cables of the DZB for installation. You need +12V (switched via the ignition lock), brake signal, pickup signal and ground/minus. The wheel sensor and the wheel magnet must be attached to the front or rear wheel of the scooter.

Digital vs. analog rev limiter:

The digital rev limiter offers numerous advantages over analog limiters:

• Infinitely variable speed adjustment
• No loss of power in the lower speed range
• Automatic activation of the limiter
• Double check for increased safety
• No cutting and soldering of cables thanks to quick cable connectors

Your benefits at a glance:

• Digital control of speed and rpm, individually or combined
• Infinitely variable programming of speed and rpm
• Adjustable pre-stages for a smooth transition
• No reduction in speed below the maximum speed in KMH mode
• No reduction in power in the lower speed range in speed mode
• Best workmanship for increased durability

Scope of delivery:

• KMH speed limiter
• Magnet for deactivation
• 4 quick connectors
• Wheel sensor + self-adhesive wheel magnet
• Detailed step-by-step installation instructions with the cable assignments of the most common manufacturers

Compatibility:

The DZB works with almost all 2T carburetor machines (e.g. with the frequently occurring Minarelli replicas such as CPI and Keeway). Unfortunately, the DZB does not work with 4-stroke engines, direct injection engines, Morini engines and engines with double pickup.