- Data Sheet
- Suitable for (13)
Andrea Pinasco was one of the first mechanics who successfully tried to improve the performance of classic Vespa scooters, and his company Pinasco consequently became one of the household names for Vespa tuning. Carburetors, cylinders, exhausts, crankshafts - everything to make your vintage Vespa run better and faster.
The Pinasco Cylinder Head VHR 69mm / 60mm stroke Vespa PX / PE 200cc was specifically developed for engines with long stroke crankshaft. Unlike the standard cylinder head, the gap between piston top and cylinder bore end is larger whereas the squish band area was reduced. Compression ratio is 11:1.
The cylinder head comes with special centering bushes so you can mount it with all Pinasco 215cc kits. Also included is a special head gasket that will readjust the height of the off-centre spark plug.
This cylinder head will lead to a power increase of 1.5hp and 1.8Nm more torque.
- for long stroke crankshafts, 60mm
- off-centre spark plug
- compression ratio 1:11
- with centering bushes and spark plug gasket / spacer
Name Pinasco Cylinder Head D.69mm / stroke 60mm for PIN-25030811 Vespa PX / PE 200cc Item No. PIN-25243609 Brand Pinasco Homologation No Homologation Yes Stroke Original Conrod Length Standard Bore 69 mm
Your product goes with the following manufacturers and their models:
PXE 200cc 1977 - 1984 (VSX1T)
Vespa PX T5 Cosa
200 Cosa CL (VSR1T)
200 Cosa CLX (VSR1T300)
200 Cosa FL (VSR1T301)
200 PE 1977 - 1984 (VSX1T)
200 PE 1980 (VSX1T)
200 PE 1981-1983 (VSX1T)
200 PX E Arcobaleno 1983 - 1984 (VSX1T)
200 PX E Arcobaleno Elestart 1984 (VSX1T)
200 PX E Lusso 1984 - 1997 (VSX1T)
Vespa Rally Sprint GT
200 Rally (VSE1T - DUCATI)
200 Rally (VSE1T - FEMSA)
200 Rally 1972 - 1979 (VSE1T)