DetailsDrive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or – even worse – pressed steel. When these parts are cooling down after production, the discs haven’t found their final shape yet and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have direct consequences on the performance. In contrast to those standard versions, the Stage6 racing drive is precisely CNC-cut out of solid material. All in all, more than twelve different versions were tested to find the optimal angle. The high quality alloys and the special surface coating used in this drive face make cooling fins unnecessary. The reduced mass has of course positive results for the power at the rear wheel. This racing drive was actually developed for drag races, but Freddy Koopmans has also successfully used them with his racing scooters since the 2004 season.
- Additional Information
Name Stage6 Pulley Racing Drive CNC CPI 16mm Item No. S6-5119500 Brand Stage6
- Fits to (8)
Your product goes with the following manufacturers and their models:
Hussar 50cc AC (after 2003) - Min horiz. (pin 12mm), Oliver 50cc AC (after 2003) - Min horiz. (pin 12mm), Popcorn 50cc AC (before 2003) - Min horiz. (pin 10mm)
F10 Wap 50cc AC (after 2004), F12 Phantom 50cc AC (after 2004), F12 Phantom 50cc LC (after 2004), F15 Firefox 50cc AC (after 2004), F15 Firefox 50cc LC (after 2004)