- Data Sheet
- Suitable for (46)
Stage6 scores again! Here's the successor of the already very powerful 70cc racing kit: Stage6 70cc Racing Cylinder Kit MKII, 12mm piston pin, MInarelli horizontal LC (Yamaha Aerox / Jog / MBK Nitro / China-based hybrid Minarelli 2-stroke and many other vehicle models).
Stage6 engineers completely revised the design of the Stage6 70cc Racing cylinder and managed to get impressive performance out of this 70cc racing kit. Out of the box, it yields 1hp more than its predecessor. This means that the MKII racing cylinders will now reach a whopping 17 to 19hp; this is, of course, in combination with the appropriate components (internal rotor ignition, bigger carburetor, oversize variator, racing exhaust etc.). And if you're really into engine tuning, you can squeeze even more out of this outstanding cylinder, up to 20hp is a realistic estimate. The output of this 70cc cylinder definitely positions it among the top racing cylinders on the market.
On a technical level, the MKII is an aluminium cylinder with extremely resistent hard-chrome coated bore. Stage6 replaced the former flathead piston with a dome piston with 0.8mm ring, basically a replica of the high-end Stage6 R/T piston. Dome pistons increase compression ration and consequently performance. Thermal characteristics are excellent, with a well-cooled divided, bridged exhaust port and a one-piece cylinder head with large cooling ducts. The cylinder has 6 transfer ports, port timings were raised to 190°-130°.
The kit includes cylinder, cylinder head, 12mm piston with ring and pin and all the gaskets needed for mounting.
Stage6 70cc Racing Cylinder Kit MKII, 12mm piston pin => for Minarelli horizontal LC engines (Yamaha Aerox / Jog / MBK Nitro / China-based hybrid Minarelli 2-stroke vehicles and more)
This 70cc racing cylinder is NOT street-legal for some countries.
Note: the temperature sensor must not be longer than 18mm, otherwise it will touch the cylinder head wall.
- 70cc aluminium cylinder with chrome-plated bore
- 6 transfer ports and bridged exhaust
- single-ring domed piston
- monobloc cylinder head
- 17 - 19hp out of the box
Name Cylinder Kit Stage6 Racing MKII 70cc piston pin=12mm Minarelli horizontal LC (Yamaha Aerox / Jog / China 2-stroke) Item No. S6-7416608 Brand Stage6 Homologation No Homologation No Displacement 70cc Stroke Original Conrod Length Standard Product Line Racing Material Aluminium Engine Type 2-stroke Cooling Type LC Bore 47,6 mm Piston Pin 12 mm Number of Piston Rings 1 Cylinder Head Included
Your product goes with the following manufacturers and their models:
Adly (Her Chee)
AirTech 50cc LC
Area 51 LC
Gulliver 50cc LC
Rally 50cc LC
SR 50cc LC (1994 - 1997) - Minarelli horiz.
SR 50cc Netscaper LC - Minarelli horiz.
SR 50cc Racing LC (before 2000) Minarelli
SR 50cc Stealth LC - Minarelli horiz.
Sonic 50cc LC
491 50cc RR LC (before 2003) - Minarelli horiz.
491 50cc RR Replica LC (before 2003) - Minarelli horiz.
491 50cc ST LC (before 2003) - Minarelli horiz.
491 50cc Sport LC (before 2003) - Minarelli horiz.
K2 50cc LC - Minarelli horiz.
Ark 50cc LC - Minarelli horiz.
Eikon 50cc LC - Minarelli horiz.
GTR 50cc LC - Minarelli horiz.
GSP 50cc LC
Dragster 50cc LC
Ark 50cc LC
Galactica 3.0 50cc LC
Speedjet 50 LC 2-stroke
MachG 50cc CAT LC (after 2003)
MachG 50cc LC (before 2003)
Nitro 50cc CAT LC (after 2003)
Nitro 50cc LC (after 1999)
Nitro 50cc LC (after 2013)
Nitro 50cc LC (before 1999)
Nitro Naked 50cc LC
Nitro Naked 50cc LC (after 2013)
F12 Phantom 50cc LC
F12 Phantom 50cc LC (after 2004)
F12 Phantom R 50cc LC
F15 Firefox 50cc LC
F15 Firefox 50cc LC (after 2004)
Crogen RS 50cc LC 2-stroke
Magnet RS 50cc LC 2-stroke
Speedjet RS 50cc LC
Aerox 50cc LC (after 1999)
Aerox 50cc LC (before 1999)
Aerox 50cc LC CAT (after 2003)
Aerox Naked 50cc LC (after 2013)
Aerox Naked 50cc LC CAT (after 2003)
Aerox R 50cc LC (after 2013)
Jog RR 50cc LC (before 2003)
Jog RR 50cc LC CAT (after 2003)