DetailsSetting up variator and clutch are of prior importance for optimal shifting characteristics and for a fast engine. In order to match the variator to the drive belt width and thus obtain excellent acceleration, you will need these washers. They will be placed between the fixed front pulley and the bushing, this way adjusting the distance between variator and front pulley. If you want to get the most out of your scooter, you won't get around setting up your variator properly, mainly relying on the concept of trial and error - but the result is really worth the effort!
30 washers, 0.1 - 0,5mm - 15 x 21mm
Suitable for crankshafts with 16mm shaft. These adjustment washers can be used for CPI/Keeway/Generic engines and for various China 2-stroke Minarelli reproduction engines.
- Additional Information
Name Stage6 Variator Shims d=16mm CPI / Chinese 2-stroke motors Item No. S6-5155016 Brand Stage6
- Fits to (25)
Your product goes with the following manufacturers and their models:
Aragon 50cc, Aragon GP 50cc, Bingo / Tennessee 50cc (before 2003), Bravo 50cc, Formular R 50cc, Freaky 50cc, GTR 50cc LC - Minarelli horiz., Hussar 50cc AC (after 2003) - Min horiz. (pin 12mm), Hussar 50cc AC (before 2003) - Min horiz. (pin 10mm), Oliver 50cc AC (after 2003) - Min horiz. (pin 12mm), Oliver 50cc AC (before 2003) - Min horiz. (pin 10mm), Popcorn 50c AC (after 2003) - Min horiz. (pin 12mm), Popcorn 50cc AC (before 2003) - Min horiz. (pin 10mm)
Arn 50cc 2-stroke, F-Act 50cc, Flash 50cc, Focus 50cc, Goccia 50cc, Hacker 50cc, Hurricane 50cc, Matrix 50cc, RX8 50cc, RY6 50cc, RY8 50cc, Swan 50cc