Description
Malossi MHR intake kit 21mm AM6 and Derbi
From the Italian tuner Malossi: Malossi intake manifold - reed valve kit (D. 21mm) for Minarelli AM6 / Derbi Euro2 / Euro3.
As this kit consists of several parts and not just one part as is usual with other manufacturers, the carburettor and air filter can be fitted in any position. By using slotted holes, Malossi has made it possible for the kit to be installed universally on all Derbi as well as AM6 engines.
Contents of Malossi intake kit:
- Malossi MHR reed valve VL6 with carbon petals
- Intake manifold made of hydrocarbon-resistant Viton(FKM), 360° rotatable, Ø21-24,5mm, l. 27mm
- Aluminum support plate
- Gasket, clamp and screws
Suitable for carburetors with 24mm and 25mm connection
- Dellorto 12-21mm type PHVA / PHBN / PHBG
- Polini CP 17.5-21 mm (25 mm connection)
- Gurtner and Weber 12-16 mm
- TK and China 2-stroke 12-16 mm
- Arreche 16-21 mm
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Intake Kit for scooter, motorcycle and moped
The intake on a 2-stroke engine is composed of a series of parts that connect the carburetor or injection unit to the engine. The aim here is to assemble the components in such a way that it leads to a better cylinder filling.
The intake system of a 2-stroke scooter or motorcycle consists of:
- Intake manifold
- Reed valve
- Sometimes with spacer / socket
What is the benefit of a tuning intake kit?
Generally, installing an optimized intake results in a straighter intake to the engine and increased intake volume to improve mixture flow and engine filling. The reed petals are usually made of fiber or carbon, which improve engine response and peak power.
Note: Installing an intake kit is often necessary when installing a larger carburetor as well as when using a sport air filter. Always remember to check carburetor settings and make sure the system is fully sealed.
| Intake System Malossi Viton 21mm AM6 / Derbi Euro 2 / Euro 3 | |
|---|---|
| Article no. | M2013800 |
| EAN | 4260088510662 |
| Weight | 0,21 kg |
| Brand | Malossi |
| Product type | Intake kit |
| Petal material | Carbon |
| Manifold connection | 24mm, 25,5mm, 25mm |
| Petal thickness | 0.30 mm |
| Variant | with venturi |
- MotoForce Racing
Intake Manifold 24/35mm PHBG / PWK / VHST Derbi24,00 €In stock soonRRP28,00 €-14% Discount - Polini
Intake Manifold Polini 360° 35mm PWK / VHST AM6 / Derbi63,00 €In stockRRP64,00 €-2% Discount - Barikit
Intake Manifold Barikit 360° 31mm TM24/PHBL Derbi32,50 €In stock - Malossi
Intake System Malossi Viton® 35mm PWK / VHST AM6 / Derbi66,00 €In stockRRP76,00 €-13% DiscountSale - Top Performances
Intake Manifold Top Performances 360° 35mm PWK / VHST AM6 / Derbi37,50 €In stock soonRRP54,00 €-31% Discount - Top Performances
Intake Manifold Top Performances TPR 360° Mikuni TM24 AM6 / Derbi44,50 €In stock soonRRP54,00 €-18% Discount