Description
Wave brake disc 190 mm Galfer with ECE-R90 approval
The Galfer brake disc in wave design with a 190 mm outer diameter offers excellent heat dissipation thanks to its wavy outer edge. This innovative profile ensures continuous pad self-cleaning and provides stable braking performance in any situation.
ECE-R90 approval
Unlike many other brands, Galfer brake components meet the ECE-R90 standard and represent tested quality, consistent performance, and full interchangeability with original components. The ECE-R90 approval confirms that the brake disc complies with European requirements for replacement parts and can therefore be legally installed.
Specifications Galfer brake disc
- Design: wave
- Outer diameter: 190 mm
- Inner diameter: 58 mm
- Thickness: 3.7 mm
- Mounting: 3-hole
- Hole spacing: 80 mm
Compatibility
Suitable for many models with 190/58 mm disc with countersunk screws at the mounting. 190/58 mm brake discs are available with 3 different mounting hole sizes for the fixing screws: 8 mm, 8 mm conical, and 10 mm. If unsure, the brake disc MF44.00400 can be used, as it has all 3 mounting options.
Suitable for Aprilia SR50 / SR125, Malaguti F12 / F15, Peugeot Vivacity 1/2 / Buxy / TKR, Piaggio Typhoon / NRG / MC3, Sym Allo, Fiddle3 125, Orbit and many more (see drop-down lists below).
Warning: Brake discs may vary significantly depending on model, year, and brake system manufacturer. Carefully check the dimensions before purchase to avoid ordering errors.
Motorcycle and scooter brake disk
The brake disc on the front wheel and / or rear wheel play an essential role in the braking system of motorcycles and scooters.
Brake rotors are firmly attached to the wheel or wheel hub with brake bolts. They work in conjunction with the brake pads, which are pressed onto the brake discs via the brake caliper. This pressure creates the friction that is important for braking, which allows the vehicle to slow down and come to a stop.
When to change the brake rotor?
Brake pads wear out faster than brake discs and need to be replaced regularly. Brake discs, on the other hand, can last between 20,000 and 40,000 kilometers, depending on driving conditions. It is recommended that you monitor brake pad wear and inspect brake rotors for signs of excessive wear or deformation. If you see any sign of damage, the brake disc should be replaced.
No matter if standard, wave or floating - when you install a new brake disc on your scooter or motorcycle, you should also replace the brake pads at the same time. You should securely fasten front or rear brake disc with threadlocker.