Description
Intake manifold + reed valve Stage6 MK2 Piaggio 50-180cc
Intake Kit Stage6 MK2 Piaggio / Gilera / Vespa, high-quality intake kit with intake manifold, reed valve, stuffers (x2) and rubber adapters (x2). No matter which carburetor you want to use, the Stage6 intake system for Piaggio engines will be the perfect addition.
This Stage6 kit allows mounting all common carburetor types on your Piaggio engine without any problems. To give the engine the best possible response, special attention was paid to keeping the intake tract as short as possible. In addition, the aluminium intake manifold is equipped with boost bottle/vacuum and oil connection.
Suitable for all Piaggio 2-stroke scooters 50ccm - 180cc like Piaggio Zip, Typhoon, Nrg, Gilera Runner, Stalker, Vespa LX...
Contents Stage6 intake kit
- Aluminum intake manifold
- Reed valve with fiberglass blades
- 2x stuffers matching the corresponding reed valves
- Intake adapter, rubber, 24mm connection
- Intake adapter, rubber, 35mm connection
- Gaskets, screws, clamps, etc.
Suitable for carburetors with 24 mm connection
- Dellorto 12-21 mm type PHVA / PHBN / PHBG
- Gurtner and Weber 12-16 mm
- TK and China 2-stroke 12-16 mm
Suitable for carburetors with 35 mm / 36 mm connection
- Keihin PWK 19-30 mm (35 mm connection)
- Dellorto VHST 24-28 mm (36 mm connection)
- Dellorto VHSH 30 mm (36 mm connection)
- Dellorto PHBH 26-30 mm (35 mm connection)
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Intake Kit for scooter, motorcycle and moped
The intake on a 2-stroke engine is composed of a series of parts that connect the carburetor or injection unit to the engine. The aim here is to assemble the components in such a way that it leads to a better cylinder filling.
The intake system of a 2-stroke scooter or motorcycle consists of:
- Intake manifold
- Reed valve
- Sometimes with spacer / socket
What is the benefit of a tuning intake kit?
Generally, installing an optimized intake results in a straighter intake to the engine and increased intake volume to improve mixture flow and engine filling. The reed petals are usually made of fiber or carbon, which improve engine response and peak power.
Note: Installing an intake kit is often necessary when installing a larger carburetor as well as when using a sport air filter. Always remember to check carburetor settings and make sure the system is fully sealed.
| Intake Kit Stage6 MK2 24/35mm PHBG / PWK Piaggio | |
|---|---|
| Article no. | S6-3214000 |
| EAN | 4051272112904 |
| Weight | 0,42 kg |
| Brand | Stage6 |
| Product type | Intake kit |
| Petal material | Fiberglass |
| Manifold connection | 24mm, 25,5mm, 25mm, 35mm, 36mm |
Spare Parts
- Stage6
Reed Petals Stage6 carbon fiber 0.35mm Piaggio18,00 €In stockRRP27,00 €-33% DiscountSale - Stage6
Stage6 Reed Petals fiberglass 0.3 / 0.4 / 0.5mm Piaggio15,50 €Not in stockRRP16,00 €-3% Discount - Stage6
Intake Rubber Boot Stage6 21mm Dellorto / Arreche / Polini CP16,50 €In stock - Stage6
Intake Rubber Adapter Stage6 35mm Keihin PWK / Dellorto VHST16,50 €In stock - Stage6
Intake Rubber Adapter Stage6 23 / 30 / 32 / 40 mmfrom 12,00 €
