Skip to content
EUR
AUDBGNBRLCADCHFCNY CZKDKKEURGBPHRKHUFIDRILSINR JPYKronaMXN PLNRONRUBTHB TRYUSDZAR
English
Deutsch
Scooter
50cc Bike
Moped
Motocross
Maxi Scooter
Vespa Classic
Pitbike

Chains and Sprockets

(13 products)
Gearboxes Chains and Sprockets Gear Drives Transmission Accessories
Find products faster
13
615
products
found
13
615
products
found
Product type
Chain Chain kit Chain master link Front sprocket Chain rear sprocket
Brand
AFAM Conti Derbi Doppler IGM Moose Racing Moto Master MotoForce MotoForce Racing Renthal Stage6 Standard Parts STR8 Voca Racing
Inside diameter
105 mm
Bolt pattern
3x2 holes
Chain links
90 100 110 114 116 120 126 130 132 134 138
Colour
Orange Silver
Price
Reset filters
Sort by:
PopularityPrice (low to high)Price (high to low)
Your filters:
Moose Racing MotoForce Renthal
Reset filters
MotoForce
Chain Kit Motoforce 12x52 - 420 Rieju MRT
Article no.: MF89.00241

Chain Kit Motoforce 12x52 - 420 Rieju MRT

53,00 €
In stock
MotoForce
Rear Sprocket 52 teeth / 420 steel Senda / MRT / DT50
Article no.: MF89.00323

Rear Sprocket 52 teeth / 420 steel Senda / MRT / DT50

15,00 €
In stock
RRP
18,50 €
-19% Discount
Sale
MotoForce
Front Sprocket Motoforce Minarelli AM6 420
Article no.: MF8900000_MF_BPIGNON_AM6_420

Front Sprocket Motoforce Minarelli AM6 420

5,50 €
In stock
MotoForce
Chain 420 / 132 links Motoforce reinforced
Article no.: MF89.00153

Chain 420 / 132 links Motoforce reinforced

18,00 €
In stock
RRP
20,50 €
-12% Discount
MotoForce
Chain 420 / 138 links Motoforce reinforced
Article no.: MF89.00151

Chain 420 / 138 links Motoforce reinforced

20,00 €
In stock
RRP
22,00 €
-9% Discount
MotoForce
Chain Kit Motoforce 13x53 - 420 Derbi Senda X-treme
Article no.: MF89.00201

Chain Kit Motoforce 13x53 - 420 Derbi Senda X-treme

46,00 €
In stock
RRP
63,00 €
-27% Discount
Sale
MotoForce
Chain Kit Motoforce 14x53 - 420 Derbi Senda X-treme
Article no.: MF89.00200

Chain Kit Motoforce 14x53 - 420 Derbi Senda X-treme

54,00 €
In stock
RRP
63,00 €
-14% Discount
MotoForce
Chain 420 / 134 links Motoforce reinforced
Article no.: MF89.00150

Chain 420 / 134 links Motoforce reinforced

23,00 €
In stock
RRP
34,00 €
-32% Discount
Sale
MotoForce
Front Sprocket Motoforce Derbi Euro 3
Article no.: MF890000_MF_PIGNONBOITE_DERBI2006

Front Sprocket Motoforce Derbi Euro 3

5,00 €
In stock
Moose Racing
Rear Sprocket aluminium 420 Moose Racing TC / SX 65 46 teeth orange
Article no.: MR12111655

Rear Sprocket aluminium 420 Moose Racing TC / SX 65 46 teeth orange

14,50 €
In stock
RRP
39,50 €
-63% Discount
Renthal
Rear Sprocket Renthal 420 Z.51 Ultra Light self-cleaning green KX 80 / 85
Article no.: REN-12111680

Rear Sprocket Renthal 420 Z.51 Ultra Light self-cleaning green KX 80 / 85

46,00 €
In stock
RRP
62,00 €
-26% Discount
MotoForce
Chain Master Link size=420
Article no.: MF89.00401

Chain Master Link size=420

2,40 €
In stock soon
RRP
2,60 €
-8% Discount
Moose Racing
Chain Moose Racing RXP Pro-MX420
Article no.: MRM57600_MASTER

Chain Moose Racing RXP Pro-MX420

12,00 €
Currently not in stock

Chain kit: chain, front sprocket, rear sprocket

Chain kit - components and function

Most motorcycles and mopeds use a front sprocket, rear sprocket (also called a chainring), and chain to transfer engine power to the rear wheel. These three parts together are referred to as a chain kit, and it is usually recommended to replace all components at the same time.

On a motorcycle or motocross bike, the front sprocket sits on the gearbox output shaft. On a moped, it is connected to the rear pulley (which in turn is driven by the V-belt).
This front sprocket drives the chain, which acts as the link between the engine and the rear wheel by turning the rear sprocket.
The rear sprocket is mounted to the rear wheel hub and ultimately turns the wheel so the bike moves forward.

There are different chain types that vary in size and length as well as intended use. There are basic chains or reinforced versions. Others are equipped with sealing rings (O-ring, X-ring, or U-ring), which makes them quieter and longer-lasting. For off-road use, there are special versions with specific surface finishes to withstand the demands of riding on rough terrain.

Front sprockets and rear sprockets are available in steel or aluminum (lighter, but less durable). For off-road use, self-cleaning versions are also available, with special cutouts between the teeth that help carry dirt away.

Choosing the right gearing

Each element of the chain kit should be selected carefully. Depending on engine output and intended use, different criteria can become important (see the previous chapter on off-road use).

Chain pitch is a key criterion: the more powerful the engine and the higher the torque, the larger the pitch.

An example: A classic moped uses a chain with a 415 pitch. An 85cc motocross bike, on the other hand, uses a 428 pitch, which is better suited to its output. A 1000cc sport bike uses a 530 pitch.

Choosing the right gearing has a direct impact on top speed and how responsive the bike feels. But caution: a weak engine cannot be run with gear ratio that is too tall. Except with very extensive engine tuning, it is best not to deviate too far from the manufacturer recommendations. It is also worth keeping in mind that with a larger change, a longer or shorter chain may be required (chain adjusters have their limits).

An example: The engine has been tuned with a higher-displacement cylinder. There is now significantly more torque and the goal is a bit more top-end speed. This can be done by fitting a larger front sprocket or a smaller rear sprocket. If a more direct response when exiting corners is preferred, a larger rear sprocket or a smaller front sprocket is used.

WARNING! One tooth more or less on the front sprocket has a much bigger effect than on the rear sprocket. It is generally said that one tooth on the front sprocket is roughly equivalent to three teeth on the rear sprocket.

Maintenance tips

Chain maintenance is very easy, but it needs to be done very regularly. Brushes and special products are available to clean the chain carefully and then grease it. The more thorough the work, the longer the chain kit lasts.

It should be noted that a new chain stretches a bit more during initial use than it does afterward. Chain tension should therefore be checked after the first ride and then regularly, to avoid the chain coming off or damage to the swingarm or other components (such as the shift lever on some models).

For off-road riders (motocross, enduro), chain care should be done after every ride, using a special off-road chain grease.

It should also be noted that some parts are in direct contact with the chain and their condition also needs to be monitored: the chain guide must a) be present and b) be in good condition so the chain does not come off. The swingarm slider protects the swingarm from friction caused by the chain.

Chain, front sprocket, and rear sprocket in our shop

In our online shop, complete chain kits are available for motorcycles, motocross bikes, and mopeds with chain drive, as well as all individual parts, to offer a very large selection.

Products in OEM quality are available, as well as reinforced versions from well-known brands such as AFAM, Iris, Moto Master, Prox, MotoForce, Stage6 or Voca Racing, Doppler, etc.

We try to always stock items for the most popular models on the market at the best prices and with short delivery times. Owners of Derbi Senda, Rieju MRT, Beta RR, Sherco SM/SE, Yamaha YZ / DT, KTM EXC / SX, Honda CRF ... etc. will find what they need.

Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products