Description
Throttle cable Rieju from 2005 with Pricol oil pump
We can offer you high-quality throttle cables from Naraku. These cables feature optimal self-lubricating properties and correspond to the original dimensions.
Suitable for Rieju 50cc models from 2005, such as MRT, MRX, SMX, RRX, Spike, and Tango.
Attention: Only fits models with a Pricol oil pump!
- Cable throttle grip-splitter: 865 mm
- Cable splitter-oil pump: 410 mm
- Cable splitter-carburetor: 260 mm
- Sheath throttle grip-splitter: 785 mm
- Sheath splitter-oil pump: 290 mm
- Sheath splitter-carburetor: 190 mm
- Splitter length: 55 mm
Throttle cable for motorcycle, scooter, moped
The throttle cable is a Bowden cable; it consists of a flexible inner cable made of steel wire, which is protected by a protective sleeve. One end is attached to the throttle grip on the handlebar, while the other end is connected to the carburetor.
How does a Throttle cable work?
When you use the throttle grip, the inner cable moves inside the sleeve and transmits the movement to the carburetor slide or injector. This regulates the amount of fuel or air that enters the engine, controlling the speed and acceleration of the vehicle.
Some two-wheelers are equipped with an oil pump, which is also connected through the throttle cable by a splitter.
Changing the throttle cable
Changing the throttle cable is relatively easy, you only need a few tools. The steps are as follows:
- Dismount the throttle grip, fully releasing the cable tensioner and removing the cable clamp.
- Remove the fairing to access the cable.
- Disconnect the cable end and pull it off the throttle slide.
- Install the new cable using the same steps in reverse order. Remember to lubricate the cable.
- If the two-wheeler is equipped with a cable splitter, you can replace several or all of the cables.
| Throttle Cable Rieju MRT after 2005 with Pricol pump | |
|---|---|
| Article no. | NK810.84 |
| EAN | 4057233984702 |
| Weight | 0,13 kg |
| Brand | Naraku |
| Product type | Throttle cable |