Beschreibung
Polini intake kit PWK / VHST Vespa PX 125 - 150cc
Polini intake kit for PWK and VHST carburetors - intake manifold including reed valve, housing, rubber adapter, clamp, gaskets and small parts for Vespa PX 125 - 150cc.
The intake kit allows the use of a larger carburetor and is therefore ideal for tuned engines. Only with the appropriate intake manifold or intake system does the cylinder get enough fuel to exploit its full potential. The intake kit can also be used if the original rotary valve no longer works or seals 100%, the kit provides an inexpensive repair option here. Irregular idle throttle and spongy response can be remedied or improved with this kit.
Suitable for carburetors with 35mm / 36mm connection
- Keihin PWK 19-30mm (35mm connection)
- Dellorto VHST 24-28mm (36mm connection)
- Dellorto VHSH 30mm (36mm connection)
- Dellorto PHBH 26-30mm (35mm connection)
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Einlass für Roller, Motorrad und Mofa
Der Einlass beim 2-Takt Motor setzt sich aus einer Reihe von Teilen, die die Verbindung zwischen Vergaser oder Einspritzeinheit und Motor herstellen. Ziel ist es dabei, die Komponenten so zusammenzustellen, dass es zu einer besseren Füllung des Zylinder führt.
Das Einlasssystem eines 2-Takt Rollers oder Motorrads besteht aus:
- Ansaugstutzen
- Membranblock
- Manchmal mit Spacer / Sockel
Was bringt ein Tuning Einlasskit?
Im Allgemeinen führt der Einbau eines optimierten Einlasskits zu einem geraderen Einlass zum Motor und vergrößertem Volumen des Ansaugtrakts, um Gemischfluss und Füllungsgrad des Motors zu verbessern. Die Membranplättchen sind meist aus Faserstoff oder Karbon, die das Ansprechverhalten und die Spitzenleistung des Motors verbessern.
Hinweis: Der Einbau eines Einlasskits ist oft eine Ergänzung beim Einbau eines größeren Vergasers sowie bei Verwendung eines Sport Luftfilters. Immer daran denken, die Vergasereinstellungen zu überprüfen und dafür zu sorgen, dass das System vollständig abgedichtet ist.
| Intake Kit Polini 35mm (PWK / VHST) Vespa PX 125 - 150cc | |
|---|---|
| Artikel-Nr. | P215.0456 |
| EAN | 8054705116711 |
| Gewicht | 0,45 kg |
| Brand | Polini |
| Product type | Intake kit |
| Manifold connection | 35mm, 36mm |