Beschreibung
Intake Manifold Kit Malossi PWK / VHST Vespa PXE 200cc
The Malossi intake kit for Vespa PXE 200cc is a complete intake system designed for PWK, VHST, and PHBH type carburetors. Upgrading to a reed valve intake system is highly recommended when trying to improve engine performance, and of course, the intake manifold must also be replaced.
The kit includes a large reed valve (VL17) with housing, an intake manifold with rubber connection and, of course, all the small parts required for installation.
Suitable for carburetors with 35mm / 36mm connection
- Keihin PWK 19-30mm (35mm connection)
- Dellorto VHST 24-28mm (36mm connection)
- Dellorto VHSH 30mm (36mm connection)
- Dellorto PHBH 26-30mm (35mm connection)
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Einlass für Roller, Motorrad und Mofa
Der Einlass beim 2-Takt Motor setzt sich aus einer Reihe von Teilen, die die Verbindung zwischen Vergaser oder Einspritzeinheit und Motor herstellen. Ziel ist es dabei, die Komponenten so zusammenzustellen, dass es zu einer besseren Füllung des Zylinder führt.
Das Einlasssystem eines 2-Takt Rollers oder Motorrads besteht aus:
- Ansaugstutzen
- Membranblock
- Manchmal mit Spacer / Sockel
Was bringt ein Tuning Einlasskit?
Im Allgemeinen führt der Einbau eines optimierten Einlasskits zu einem geraderen Einlass zum Motor und vergrößertem Volumen des Ansaugtrakts, um Gemischfluss und Füllungsgrad des Motors zu verbessern. Die Membranplättchen sind meist aus Faserstoff oder Karbon, die das Ansprechverhalten und die Spitzenleistung des Motors verbessern.
Hinweis: Der Einbau eines Einlasskits ist oft eine Ergänzung beim Einbau eines größeren Vergasers sowie bei Verwendung eines Sport Luftfilters. Immer daran denken, die Vergasereinstellungen zu überprüfen und dafür zu sorgen, dass das System vollständig abgedichtet ist.
| Intake Kit Malossi 35mm PWK / VHST / PHBH Vespa PXE 200cc | |
|---|---|
| Artikel-Nr. | M2014913 |
| Gewicht | 0,30 kg |
| Brand | Malossi |
| Product type | Intake kit |
| Diameter carburetor | 35mm |
| Manifold connection | 35mm, 36mm |