Description
Drive belt piaggio nrg
Original spare part Piaggio
We offer a large selection of original spare parts for scooters, maxi scooters, supermotos, mopeds, dirt bikes and much more. This is the original Piaggio V-belt for many vehicles with a long Piaggio 2-stroke engine (Aprilia, Derbi, Piaggio, Vespa, Gilera).
technical data Vespa V-belt:
- Dimensions (length x width x thickness): 811 x 18.5 x 8 mm
- Piaggio OEM part no.: 436864
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
