Description
Universal Rear Brake Master Cylinder
Universal rear brake master cylinder with 38mm–51mm mounting hole spacing.
This complete rear brake master cylinder is a replica replacement for the original part. It fits mounting hole spacings from 38mm to 51mm and comes with a hose, reservoir and cap. Connect it in place of the original, then bleed the brake system.
Suitable for many gearbikes and motorcycles, including Derbi, Aprilia, Gilera, Beta and Rieju models. It can also be fitted to other two-wheelers.
Tip: During installation, bleed the brake system and replace the brake fluid to ensure optimal performance.
Warning: This brake master cylinder is sold as a universal replacement part. Check that it’s suitable for your vehicle and intended use before purchase.
Universal Rear Brake Master Cylinder Details
- Universal rear brake master cylinder
- Piston diameter: 14 mm
- Adjustable bolt spacing: 38mm–51mm
- Color: Silver
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
| Brake Master Cylinder rear universal silver | |
|---|---|
| Article no. | MF45.00044 |
| EAN | 4051272003288 |
| Weight | 0,28 kg |
| Brand | MotoForce |
| Product type | Brake pump |
| Colour | Silver |
