Description
Brake Master Cylinder with Lever and M10 Mirror Mount
Universal hand brake master cylinder for the front disc brake, with a front brake lever and M10 mirror mount. The assembly includes a brake lever, an M10 threaded mirror mount, a handlebar clamp and a brake light switch. It is well suited to handlebar conversions and/or as a regular replacement part if the original replacement part is no longer available or too expensive.
Note: When modifying the front brake, the brake system must be bled and filled with new brake fluid.
Warning: This brake master cylinder is sold as a universal replacement part. Its suitability for the vehicle and intended use should be checked before purchase.
Details Universal Brake Assembly
- Universal right-hand brake master cylinder
- Includes brake lever, brake fluid reservoir and brake light switch
- Compatible with 22mm handlebars
- M10 mirror mount with right-hand thread
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
| Brake Master Cylinder front with lever + M10 mirror mount | |
|---|---|
| Article no. | MF45.00029 |
| EAN | 4260405315772 |
| Weight | 0,43 kg |
| Brand | MotoForce |
| Product type | Brake pump |
