Description
Stage6 Steel Braided Brake Line - orange
Universal brake line for the front brake, 110cm long, with 90° and 25° connections. Suitable for scooters and 50cc motorcycles (supermoto, enduro).
Advantages of Steel Braided Racing Brake Lines
Stage6 developed this high-quality steel braided line specifically for racing, but it can also be used for everyday riding.
Due to the stable stainless steel mesh, steel braided brake lines prevent the elastic expansion of the hose under load, which results in a clear pressure point and significantly better modulation at the brake lever. At the same time, the robust coating offers permanent protection against mechanical damage as well as UV radiation and ensures almost unlimited aging resistance of the line.
Universal Stage6 Brake Line
These lines are intended for universal use on various vehicle types. The length and angles of the banjo connectors of the original brake line should be checked beforehand. The 110cm version is primarily designed for the front brake.
When installing a new hose, always change the brake fluid and bleed the brake system to ensure safe and efficient braking.
Stage6 Brake Line Specifications:
- Application: Front brake
- Length: 110cm
- Connectors: 90° and 25°
- Color: Orange
Brake hoses
Brake hoses or brake lines are relatively reliable, but it can happen that they expand too much when the temperature of the brake fluid rises too much, or that they rust when the brake fluid becomes too old.
Brake lines can be replaced with original brake hoses, or with high quality steel braided brake lines that withstand high temperatures, do not expand and do not become porous. This keeps the pressure point and braking power constant.
How to replace Brake lines
Whether on a scooter or a motorcycle, the principle is always the same. Generally, except on vehicles with brake force distributors, the hose connects the brake pump to the brake caliper.
To remove the hose, you need to remove the banjo bolts at both ends. Be careful not to lose the copper washers! Check the condition of the copper washers and replace them if necessary.
The assembly is done in the same way. Note the position of the washers - one between the banjo fitting and the hose, the other between the hose and the caliper or brake pump.
After having tightened everything (usually 20 to 30 N.m and no more), you need to add brake fluid and bleed the brake system using the bleed screw on the caliper.
You can either bleed manually or with a special brake bleeder.
| Brake Line Stage6 110cm 90° + 25° orange | |
|---|---|
| Article no. | S6-1416601/OR |
| EAN | 4051272073939 |
| Weight | 0,24 kg |
| Brand | Stage6 |
| Product type | Brake line |
| Homologation | No |
| Colour | Orange |
- Standard Parts
Banjo Bolt M10x1.25 steel6,50 €In stock - MotoForce
Washer (seal) for banjo bolt, d=10x14x2mm / copper2,60 €In stockRRP2,80 €-7% Discount - Motul
Brake Fluid Motul Dot 5.1 500ml9,60 €19,20 € / 1 LIn stock - Motul
Brake Fluid Motul Dot 3 & 4 500ml10,50 €21,00 € / 1 LCurrently not in stock - Stage6 R/T
Banjo Bolt Stage6 for R/T 4-piston caliper, w. bleed nipple10,00 €In stockRRP13,00 €-23% DiscountSale