Already famous in the mecaboite/geared moped scene, finally available for scooters here at Maxiscoot for a very good price: the Top Performances 86cc Tuning Kit (cylinder + 44mm stroke crankshaft) Piaggio NRG / Runner (Piaggio / Gilera LC). With an excellent reputation regarding geared mopeds/mecaboites already established, Top Performances came up with this 86cc Aluminium Tuning Kit for scooters with Piaggio / Gilera LC engines (NRG, Runner, Zip LC, NTT, etc.).
The cylinder is made of Nikasil-plated aluminium with a 50mm diameter and 44mm stroke, has 6 transfer ports, a bridged exhaust port and a modular high compression cylinder head. The exhaust port is very "large" across its entire width giving it a unique look. Special attention was also given to the cylinder's external surface with a cooling canal enclosing the entire exhaust port for optimum cooling. The crankshaft included in this Top Performances 86cc Tuning Kit Piaggio NRG / Runner is a reinforced full-circle racing crankshaft with "extended" stroke - 44mm, 85mm conrod, small end bearing 12x15x15mm. One of the unique features characterizing high-end crankshafts is the use of Tungsten weights instead of standard "caps" for balancing.
Regarding performance, the Top Performances 86cc Tuning Kit Piaggio NRG / Runner is a Hyper Racing kit and develops 20/22hp in combination with the proper components:
- min. 28mm carburetor
- digital inner rotor ignition
- “Hyper Racing” exhaust.
The Top Performances Tuning Kit 86cc (cylinder kit + 44mm stroke crankshaft) Piaggio NRG / Runner includes two crankshaft bearings (C3 Polyamide cages) and oil seals.
Note: the crankcase has to be milled to make room for the 44mm crankshaft, and also for the cylinder base (d=56mm).
- Additional Information
Name Top Performances Tuning Kit 86cc cylinder kit + crankshaft stroke=44mm Piaggio NRG / Runner Item No. T9928440 Brand Top Performances Homologation No Homologation No Displacement 86cc Stroke 44 mm Conrod Length 85 mm Product Line Hyper racing Material Aluminium Engine Type 2-stroke Cooling Type LC Bore 50 mm Piston Pin 12 mm Number of Piston Rings 1
- Fits to (31)
Your product goes with the following manufacturers and their models:
SR 50cc Funmaster LC (after 07/2003) - Piaggio engine, SR 50cc LC (after 07/2003) - Piaggio Engine, SR 50cc R Factory i.e. LC (after 2005) - Piaggio Engine, SR 50cc R LC (after 2005) - Piaggio Engine, SR 50cc Racing LC (after 07/2003) - Piaggio Engine, SR 50cc Sport LC (after 07/2003) - Piaggio Engine, SR 50cc Street LC (after 07/2003) - Moteur Piaggio
Atlantis 50cc LC (after 06/2002) - Piaggio, GP1 50cc LC - Piaggio, GP 1 Open 50cc, GP1 Racing / Revolution 50cc LC - Piaggio, GP 1 Racing 50cc, GP 1 Replica 50cc, GP 1 Revolution 50cc
DNA 50cc LC, Runner 50cc LC (1999 - 2000), Runner 50cc LC (after 2004), Runner 50cc LC (before 1999), Runner 50cc LC CAT (after 2001), Runner SP 50cc LC (after 08/2004)
NRG 50cc LC, NRG Power DD 50 (after 2005), NRG mc2 50cc LC (after 1998), NRG mc2 50cc LC (before 1998), NRG mc2 DD 50cc LC (after 1998), NRG mc2 Extreme 50cc LC, NRG mc3 DD 50cc LC CAT, NTT 50cc LC, Quartz 50cc LC, Zip 2 SP 50cc LC, Zip SP 50cc LC