DetailsAfter mounting a downhill handlebar, the original speedo cover will have usually have to go as well, so that you need a fitting replacement. MTKT’s front fairing attachment offers a great style, integrating the Stage6 speedometer into the front fairing – a project that has meant tedious GRP work so far.
The Stage6 speedo (S6-4080/OR, S6-4080/WH) is not included in the delivery, but will have to be ordered separately.
Multifunctional, universal digital Stage6 speedometer with illuminated display, available with white or orange casing.
The speedo has a size of 100 x 60 x 20mm and requires a 12V supply. Revs are picked up inductively while the speed is picked up via a magnet sensor installed at the wheel.
As an alternative, a speedo adapter for Yamaha/MBK and Piaggio models can be supplied that allows for transmitting the speed directly from the speedo drive to the instrument. Part numbers are listed under spare parts.
For racing engines and racing ignitions, resistor spark plugs will have to be used.
The speedometer has the following features:
* Speedometer 0–360 km/h (or mph)
* Rev counter up to 20,000 rpm
* Scalable rpm curve
* Thermometer 0–250° C (PT-1/8' sensor)
* Engine hours meter 0–999.9 h
* Fuel gauge 0–100%
* Voltmeter 0–18.0 V
* Odometer, shift light, top speed storage, temperature alarm
There is also a timer that allows for measuring
* the time necessary to reach a certain speed
* the time necessary to cover a certain distance
After connecting the speedometer to the 12 V on-board supply, the speedo is ready for use. It can be used for two-stroke and four-stroke scoots as well as for vehicles with manual transmission.
Equipped with two PT-1/8 temperature sensors that can pick up the temperature at two places in the cooling circuit. For Piaggio and Peugeot, additional temperature sensors with a M10 x 1.0 or M14 x 1.25 pitch are available.
(WEEE Reg. No. DE 60350111)
- Additional Information
Name Speedometer cover, front fairing MTKT Aerox/ Nitro 2013 for speedos Stage6 and KOSO DB02, white Item No. L-MTKT1419 Brand Motorkit Fairing Material Plastic Composition Miscellaneous
- Fits to (5)
Your product goes with the following manufacturers and their models:
Nitro 50cc LC (after 2013), Nitro Naked 50cc LC (after 2013)
Aerox 4 50cc 4-stroke, Aerox Naked 50cc LC (after 2013) , Aerox R 50cc LC (after 2013)