DetailsHigh quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Note: Use the Malossi needle bearing M6611785.
The engine block will have to be revised in the lower centre area of the cylinder base to accommodate the beefed up conrod. This can easily be done using sandpaper or a dremel. Please make sure not to damage the sealing surface for the cylinder.
- Additional Information
Name "Malossi Crankshaft ""MHR"" RHQ Peugeot Speedfight / Trekker" Item No. M538619 Brand Malossi Product Line Racing, Hyper racing RPM Range 0 - 16000 RPM Stroke Original Conrod Length Standard Piston Pin Original Crankshaft end Smooth Material Steel Bearing Ø original
- Fits to (24)
Your product goes with the following manufacturers and their models:
Buxy 50cc AC, Buxy M 50cc AC, Elyseo 50cc AC, Elystar 50cc AC, Gipsy 50cc, Looxor 50cc AC, Metal-X 50cc, Speedake 50cc AC, Speedfight 2 50cc AC, Speedfight 2 50cc AC (after 2004) - (Euro 2), Speedfight 2 50cc AC - 307 WRC (Euro 2), Speedfight 2 50cc LC, Speedfight 2 50cc LC (after 2004) - (Euro 2 ), Speedfight 2 50cc LC - 307 WRC (Euro 2), Speedfight 50cc AC, Speedfight 50cc LC, Splinter 50cc AC, Squab 50cc AC, TKR 50cc AC, TKR 50cc AC - 307 WRC (Euro 2), TKR 50cc AC - Furious (Euro 2), Trekker 50cc AC, Vivacity 50cc (before 2008, vertical AC), Zenith 50cc AC